Hi Barnsie, Thanks very much for your kind comments. A big thank you to Keith for the plans. From the plans and table of offsets I have traced, measured and cut out all the moulds, planks and frames myself, alone, by hand. Hence the somewhat tired and dazed look in the last photo. Regarding the buoyancy bags, for each bag I intend to cut out 6 small blocks of 12mm marine ply and drill 2 holes in each to take 5mm rope which will pass through a loop in each of 3 webbing straps per bag and will be tied up with a reef knot. There will be 3 blocks mounted on the inner base of the hull towards the keelson and 3 blocks mounted on the inner base of the hull under the deck since the pine stringers are a liitle light. Thanks again Ainslie French - Luna Rossa ;-)
Posted: 18/05/2017 16:04:39 By: Luna Rossa |