i have jus done an overhall of the refrigerator and found that the blocks that mount below the seat for all the ropes to go to the cleats are a bit nakered
has any1 renovated a white whale in the past and managed to get hold of the bearing and blocks to replace them?
ne help would be great
Posted: 05/01/2009 08:45:54 By: James 3403 |
james Are these the control line blocks in the form of a cassette which are let into the knee under the thwart? If the answer is 'yes' then you can rebuild the cassette buy purchasing the individual ball bearing sheaves to replace the tired ones (well they are over 20 years old!) Hope this helps
Posted: 05/01/2009 10:07:01 By: Peter Scott |
Holts do a single sheave with a bolt through it. Nuy a few take the bolts out and you have the sheaves. Won't be cheap though!
Posted: 05/01/2009 10:54:20 By: Chris M |
ta ladz. yes it is them ones scotty,
will get onto holt soon and find out the price. i only need 3 sets realy
it's not looking good for blithfield on sunday looking at the weather does it ladz.
will get some pics of the boat sorts for you all to see.
Posted: 05/01/2009 11:58:46 By: James 3403 |
Tim will probably post on here if it freezes over the week as he only lives up the road. There's a lot of water to freeze though! I think Pete Male said it was 3 degrees (the water) on sunday.
Posted: 05/01/2009 16:19:49 By: Chris M |
James, allen's do the sheaves not Holt (any more) there are several different sizes and configurations both in ball versions and plain versions. Give me a call if you need any help. I stock some of them... Regards Tony 07977 512673
Posted: 05/01/2009 17:23:03 By: Blackie |
cheers tony
will give u a ring soon. will get the measurements before i ring u
Posted: 06/01/2009 09:03:41 By: James 3403 |
thanks tony for sorting out there bits.
they arrived yesterday and will be fitted at the weeknd
hopefully cu around
safe sailing!!
Posted: 21/01/2009 09:18:45 By: James 3403 |