Hey folks, spent last week tuning and rerigging my new shiny thing (NSM4) with more elastic than a local fettish market. Now all is peachy except for the lack of lowers. If I pull the ropes with too much enthusiasm the mast bananas sideways like something out of the Matrix dodging a bullet, so holes in the deck and lowers are a must.
However, woodwork and me don't quite see eye to eye. I cut straight and true with a carefull eye and nice sharp tools, and I end up with a mess and lots of filler - and likely a broken boat!
Soooo, I'm looking for a company or skilled individual in the Midlands who's done it before to fit some lowers. The mast already has the required fittings.
Any reccomendations/takers??
Cheers,
Stuart.
Email: [email protected]
Posted: 03/08/2005 00:29:51 By: Stuart |
Find a good local boat builder ,with printed tuning guides under your arm and away you go.The best drill to use is a spur and bit .This will not splinter the wood. Good luck.
Posted: 03/08/2005 08:51:38 By: WHAAAAAAAAA |
Try Phil Scott.
Able to do anything.
Even fixed my Merlin Nissan Micra
Posted: 03/08/2005 19:06:26 By: Midland Circui Chap |
try Pinnell & Bax
01604 592808
speak to Tom Stewart
Posted: 04/08/2005 09:35:48 By: . |
Thanks for the info, I've contacted Pinnell & Bax, any contact details for Phil Scott?
Cheers,
Stuart.
Posted: 10/08/2005 22:55:36 By: Stuart |
Email Chris Martin on [email protected]
He's a mate of Scotty's and I'm sure he'll put you in touch.
Posted: 10/08/2005 22:56:53 By: Jon |
my last contact number for Phil Scott was
07973720732
Posted: 11/08/2005 08:56:08 By: Dave F |
