Does anyone have some SS alloy spreaders in good order they don't mind parting with? I would go to LDC but they have a nasty habit of supplying them with the inner holes drilled larger than the bracket holes, which of course means movement around the bolt and the inevitable elongation of holes.
So if there are any out there with the inner holes at the right size and circa 40cm long, I'd be a grateful and I'm sure a deal could be struck! Based Hamble or Hayling
Mark
07900 081739
Posted: 23/08/2007 14:06:17 By: mark nicholson |
They are all supplied like this. My solution was to drill out the bracket.
Posted: 23/08/2007 14:54:02 By: Chris m |
Really?! How ludicrous! Thanks, I may have to do that - or stuff the end with epoxy and re-drill. But if there are any older ones out there...?
Posted: 23/08/2007 16:34:13 By: mark nicholson |
I have some old Iso spreaders from a Super Spar mast which may do the job.I live in Camberley and work in Havant. I will check them out at the weekend and bring them down next week if they suit. Regards Rod
Posted: 29/08/2007 12:54:52 By: Rod |
Mark are you still after some spreaders?
Rod
Posted: 20/10/2007 15:32:33 By: Rod Porteous |
Hi Rod - sorry, not looked at forum for a bit. Yes, I am - let's talk. Please call/text me your number
Thx
Mark
Posted: 22/10/2007 11:37:08 By: mark nicholson |
Think there is a Superspar bracket & spreaders in my garage if any one is interested.
Posted: 22/10/2007 19:19:59 By: Charlie |
Mark
I have tried your mobile but had no response you can contact me on 02392 249330 Work or mobile 07785 590402
Rod
Posted: 24/10/2007 13:02:06 By: Rod |
Mark
I have tried your mobile but had no response you can contact me on 02392 249330 Work or mobile 07785 590402
Rod
Posted: 24/10/2007 13:02:32 By: Rod |
